Product

LPKF Stencil Laser P 6060은 버튼 하나로 스텐실을 커팅 할 수 있습니다. 이 P 6060은 SMT 솔더 페이스트 스텐실을 위한 최첨단 생산시스템입니다. 설치 공간이 축소되었고 사용하는 것도 편리해졌습니다. 빠른 커팅 속도와 저 생산비용은 스텐실 레이저 시장에서 가장 우월함을 보여줍니다. 또한 기존의 sus프레임 부착 유무와 상관없이 스텐실을 제작할 수 있습니다.

The LPKF StencilLaser P 6060 cuts stencils at the push of a button. LPKF’s StencilLaser P 6060 is a state-of-the-art production system for SMT solder paste stencils. It incorporates space saving design and ease of use. Its high cutting speed and very low operating cost makes the LPKF StencilLaser P 6060 the most affordable system on the market. The Lasersystem can cut both framed and frameless stencils, without requiring any changeover.

최첨단 레이저기술
경량 모션 시스템은 빠른 커팅 속도로 커팅 위치를 정확하게 찾아내줍니다. LPKF StencilLaser P 6060은 모든 산업 표준을 충족시킬 뿐 아니라 최고 품질의 커팅면을 제공하는 광학 빔 전달 시스템을 보유하고 있는 최첨단 화이버 레이저 시스템입니다.

State of the Art Lasertechnology
The light weight motion system allows excellent positioning accuracy while maintaining cutting speeds that are the highest in its class. The LPKF StencilLaser P 6060 uses a state-of-the-art fiber laser system with custom optics and beam delivery system, providing sidewall qualities that meet and exceed all industry standards.

간단한 작동
고품질의 스텐실 제작은 간단한 단계를 거칩니다. 라이브러리에서 알맞은 프레임을 선택합니다. 프레임을 로드합니다. 커팅 할 부분을 지정하고 시작 버튼을 누릅니다. 이 모든 것은 홈 화면 한 곳에서 조작이 가능합니다.

Simple Operation
Produce high quality stencils In just a few simple steps: select the proper frame from the library, load the stencil, select the cutting job and push start – all from one simple home screen.

조작의 편리함
LPKF Circuit CAM 소프트웨어는 고객이 원하는 디자인을 할 수 있도록 해주고 필요할 때마다 파일을 열어 사용할 수 있습니다. 또 빠르고 쉽게 매트릭스 코트 데이터나 파트 넘버, 회사 로고를 스텐실 어느 곳에나 새길 수 있습니다.

Controlled Flexibility
The LPKF CircuitCAM software saves design rules for global editing of aperture dimensions or geometries as customer-specific templates that can be recalled on-demand at any time. Quickly and easily engrave data matrix codes, part numbers or company logos on either side of the stencil.

유지비용절감
긴 수명 화이버 레이저 기술은 고비용의 광원 램프의 정기적 교환의 필요성을 제거시켜줬습니다. 1500VA 이하의 적은 소비 전력은 매달 전기요금이 줄도록 도와줄 것입니다.

Low Total Cost of Ownership (TCO)
The Long-Life fiber laser technology eliminates the need to regularly replace the expensive flashlamps used by laser systems of the past. Furthermore, the entire system draws less than 1,500 VA of power over all, keeping your monthly electric bill to a minimum.

플러스 앤 플레이
StencilLaser P6060은 LPKF에서 처음으로 플러그 앤 플레이를 보여준 레이저로써 최소한의 장비가 갖추어지면 사용이 가능합니다. 냉각기 또는 고압 전기 연결이 필요하지 않습니다. 벽(115V 또는 230V)에 플러그를 꽂으면 최단 시간 내에 스텐실을 생산할 수 있고 평방 2m이하 (20평방피트)의 작은 공간에서도 설치가 가능합니다.

Plug & Play
The StencilLaser P 6060 represents the LPKF "Startline" and requires minimum setup, does not need a water chiller or high power electrical connections. It is out of the box, plugged into the wall (115 V or 230 V), setup once and producing stencils within shortest time. The small footprint of less than 2 m2 (20 sq. ft.) allows for installation even where space is limited.